Ir para

Aviso aos navegantes: O PHPMania está com novidades e esperamos que gostem. Caso encontrem algum erro, ou tenham alguma dúvida e/ou sugestão crie um tópico clicando aqui.

How to make HP printer color offset adjustment?

tn450 hp ink cartridges

  • Please log in to reply
No replies to this topic

#1 adtozhou



  • Membros
  • PipPip
  • 11 Posts:

Postou 06 setembro 2017 - 01:57

HP printer color offset adjustment method:
Step 1: Replace the toner cartridge For hp ink cartridges, HP does not provide quality or reliability guarantee. In order to ensure good print quality, it is recommended to use hp ink cartridges. If the toner cartridge has been refilled, replace the toner cartridge.
Step 2: Perform the calibration
Install the printer driver completely.
Hold down the "Feed " button for 5 seconds and then let go. The printer automatically prints the self-test / configuration page. View the page on whether there are black, green, goods, yellow four colors. If the lack of a color or a color patch is not complete, indicating that the corresponding cartridge may have been missing toner, it is recommended to replace the cartridge. As shown in Figure 1 Self Test / Configuration Page: Figure 1: Self Test / Configuration Page
Click Start → All Programs → HP → HP Color LaserJet CP1210 Series → HP Color LaserJet tn450 Series Toolbox.
In the HP Toolbox window, expand the Device Settings main item and click the Print Quality subkey. As shown in Figure 2 print quality: Figure 2: Print quality
In the Print Quality window, click the Calibrate button and the printer starts performing the calibration. As shown in Figure 3 calibration: Figure 3: school
In the "HP Color LaserJet CP1215" window, click the "OK" button.
Find printer toner cartridges for nearly any model of laser printers on the market today at V4ink. We offer a complete line of drums and toner cartridges printing supplies at a fraction of the cost of branded products.
The "Continue", "Ready ()" and "Attention ()" lights will illuminate sequentially when the printer is performing calibration. Wait for a moment until the Ready () light is steady and the printer is in the Ready state.
Step 3: Adjust the print density The laser printer can adjust the print density to achieve the printing color depth. Step 4: Change the color profile You can control the print color of the printer by changing the color profile. To change the color configuration file, follow these steps:
Click Start → Printers and Faxes. In the Printers and Faxes window, locate the printer's icon.
In the Printers and Faxes window, right-click the HP Color LaserJet CP1215 icon and select the Print Preferences menu item.
In the HP Color LaserJet CP1215 Printing Preferences window, click the Color tab, select the appropriate color profile from the RGB Color drop-down list, and then click the OK button. As shown in Figure 5, the color options: Figure 5: Color options
At this point, you can send the print job again to see if the printed page is working properly.

0 usuário(s) está(ão) lendo este tópico

0 membro(s), 0 visitante(s) e 0 membros anônimo(s)